Texas Instruments logo
Application & Sourcing Solutions

Solve Power, Control, Sensing, and Connectivity Challenges With TI Components.

YURUNOX helps engineering and procurement teams connect a system requirement with suitable Texas Instruments product families, then source the exact part number with order-specific availability, quality evidence, and delivery terms.

Search TI Parts
Texas Instruments analog, power, and embedded components
FROM DESIGN NEED TO ORDERIdentify the function, narrow the component family, confirm the MPN, and review the actual supply before purchase.
POWER EFFICIENCYConvert and Manage Power

Regulate rails, reduce loss, sequence supplies, and protect system power paths.

PRECISION SIGNALSMeasure With Accuracy

Condition low-level signals, convert data, monitor sensors, and improve noise performance.

REAL-TIME CONTROLProcess and Control

Run motor, power-conversion, human-machine, and embedded control workloads.

RELIABLE INTERFACEConnect System Blocks

Bridge signals, drive loads, isolate domains, and connect industrial networks.

Start With the Engineering Need

Select the TI Technology Direction by the Problem You Need to Solve.

The correct part number depends on voltage, current, accuracy, bandwidth, processing, interface, environment, package, qualification, and lifecycle requirements. These solution paths help organize the first selection discussion.

01 / POWER

Need Stable, Efficient, and Protected Power?

Use TI power-management families to convert input rails, generate point-of-load supplies, sequence multiple voltages, drive power stages, monitor current, charge batteries, and protect the system from abnormal electrical conditions.

RELEVANT TI FAMILIESBuck and boost converters, LDOs, PMICs, gate drivers, battery management, current sensing, supervisors, and protection devices.
02 / SIGNAL

Need to Capture Small or Noisy Signals?

Build a signal chain that amplifies, filters, converts, references, and monitors sensor outputs while accounting for offset, drift, noise, bandwidth, input range, common-mode conditions, sampling rate, and resolution.

RELEVANT TI FAMILIESOperational amplifiers, instrumentation amplifiers, ADCs, DACs, voltage references, comparators, analog switches, and sensor interfaces.
03 / CONTROL

Need Faster Real-Time Decisions and Control?

Choose processing platforms according to control-loop timing, arithmetic performance, memory, peripherals, communications, operating system, security, temperature, package, and software ecosystem requirements.

RELEVANT TI FAMILIESC2000 real-time controllers, Sitara processors, MSP430 microcontrollers, Arm-based MCUs, DSPs, and supporting memory or clock devices.
04 / CONNECT

Need Robust Communication Between System Domains?

Connect controllers, sensors, drivers, networks, and higher-voltage domains while reviewing protocol, data rate, distance, common-mode range, isolation, surge, ESD, logic level, channel count, and package constraints.

RELEVANT TI FAMILIESCAN, LIN, RS-485, Ethernet, USB, serial interface, digital isolators, level translators, logic gates, load drivers, and connectivity devices.
Application Solutions

Support the Electronic Functions Behind Industrial and Connected Products.

TI product families can be combined across the signal, power, processing, and interface chain. Final selection must be validated against the complete system specification and current manufacturer documentation.

FACTORY AUTOMATION

Motor Drives and Machine Control

Real-time controllers, gate drivers, current sensing, isolation, industrial communications, encoder interfaces, and protected power rails.

ENERGY SYSTEMS

Solar, Storage, and Power Conversion

Control high-frequency conversion, measure current and voltage, manage batteries, isolate signals, and supervise critical supply rails.

INSTRUMENTATION

Precision Measurement Equipment

Low-noise amplification, high-resolution conversion, accurate references, sensor excitation, isolation, and controlled system power.

TRANSPORTATION

Vehicle and Charging Electronics

Power conversion, battery monitoring, interface protection, sensing, real-time control, and qualified component selection where required.

COMMUNICATION

Connected Industrial Equipment

Ethernet, CAN, serial interfaces, level translation, isolation, timing, power management, and embedded processing for reliable data paths.

EMBEDDED EDGE

Human-Machine and Edge Control

Application processors, microcontrollers, display and interface devices, audio, connectivity, memory support, and multi-rail power design.

Selection and Procurement

Connect the Design Requirement to the Purchasing Requirement.

A technically suitable family is only the start. Before procurement, confirm the complete MPN, package, qualification, lifecycle, quantity, date or lot requirement, source basis, evidence, and delivery timing.

CUSTOMER NEEDTI TECHNOLOGY DIRECTIONPROCUREMENT CHECK
Reduce system power lossDC/DC, LDO, gate driver, PMIC

Input and output range, current, efficiency, switching frequency, thermal design, package, and qualification.

Improve measurement accuracyAmplifier, ADC, reference, sensor AFE

Accuracy budget, noise, drift, bandwidth, channel count, sample rate, resolution, input range, and package.

Control motors or convertersC2000, driver, current sensing, isolation

Loop rate, PWM, ADC timing, arithmetic performance, voltage domain, isolation, temperature, and lifecycle.

Connect industrial devicesCAN, RS-485, Ethernet, isolator, logic

Protocol, data rate, distance, common mode, ESD, surge, isolation rating, channels, and package.

Maintain a mature designExact MPN or approved alternate

Lifecycle, form-fit-function compatibility, firmware impact, qualification, lot condition, evidence, and approval authority.

Electronic component inspected beneath a stereo microscope
After the Part Is Selected

Confirm the Actual Supply Before the Order Is Released.

Technical selection does not confirm stock condition. YURUNOX aligns sourcing, quality, commercial, and delivery requirements with the exact quoted part, source, lot, and quantity.

Part and Lot Alignment

MPN, manufacturer, package, quantity, labels, lot or date information, and available traceability.

Inspection Scope

Visual, microscopic, marking, X-ray, electrical, functional, or other methods when suitable and agreed.

Commercial Confirmation

Offered quantity, price basis, validity, payment, lead time, freight, evidence, and exceptions.

Packing and Delivery

ESD and moisture protection, carrier handoff, documents, tracking, destination, and receiving support.

TI Component Sourcing Support

Have a TI Part Number or Application Requirement?

Send the system function, technical constraints, preferred MPN or BOM, quantity, target date, destination, and quality requirements for an order-specific sourcing review.

Cart (0 items)